Shrewsbury roofers · Free, no-obligation quotations
Not sure what you need?Call 07398 528077

Local flat-roof specialists

Flat roofing Shrewsbury
built to keep water out.

Topline Roofing installs, replaces and repairs flat roofs across Shrewsbury using EPDM rubber, GRP fibreglass and high-performance felt systems. Every recommendation starts with a proper survey of the roof, deck and drainage.

— New roofs, replacements and repairs

A flat roof is a
complete weatherproof system.

The visible covering is only one part of a reliable flat roof. The deck, falls, insulation arrangement, perimeter trims, wall upstands, outlets and penetrations all need to work together so water drains away and vulnerable junctions remain protected.

We survey the existing construction before recommending a repair or replacement. Where the old covering is removed, the exposed deck can be checked and any agreed remedial work dealt with before the new system is installed.

Topline provides flat roofing for both domestic and commercial customers within our approximate 18-mile Shrewsbury service area.

Check our local coverage map →

— Flat roof systems we install

EPDM, GRP or felt:
the right system for the roof.

We explain the practical advantages and limitations of each option after inspecting the property. Product choice is never based on a headline alone.

01

EPDM rubber roofing

A flexible single-ply rubber membrane used for many domestic flat roofs. Correct preparation, bonded installation and careful detailing around edges, outlets and penetrations are essential.

  • Clean, modern appearance
  • Few field joints on suitable roof areas
  • Suited to many extensions and garages
02

GRP fibreglass roofing

A rigid, seamless glass-reinforced plastic system formed on a suitable new deck and finished with a weather-resistant topcoat. Trims create neat perimeter and drainage details.

  • Strong seamless surface
  • Crisp edge and trim details
  • Popular for extensions, dormers and porches
03

High-performance felt

A modern multi-layer bituminous roofing system. It is very different from basic shed felt and can be a practical, proven choice when the deck, falls and detailing are correctly specified.

  • Multi-layer weather protection
  • Adaptable around awkward roof shapes
  • Suitable for domestic and commercial work

— Domestic and commercial flat roofs

Flat roofing for
different properties.

Small roof areas can contain several complex junctions, so they deserve the same careful detailing as a large installation.

Home extensions

New and replacement flat roofs where the covering meets the main house, walls, windows or rooflights.

Garages and outbuildings

Weatherproof systems for attached and detached garages, workshops, stores and other outbuildings.

Dormers and porches

Careful edge, abutment and outlet details for smaller roof areas with several vulnerable junctions.

Garden rooms

Modern flat roof finishes for insulated garden rooms and purpose-built home working spaces.

Commercial premises

Flat roofing for offices, retail units, warehouses, schools and other business properties.

Existing flat roofs

Survey-led repair or complete replacement of ageing, leaking or repeatedly patched roof systems.

— A focused repair

Repair may be suitable when

  • The source of the leak is isolated and accessible
  • The surrounding covering remains serviceable
  • The deck is sound and water drains correctly
  • A durable compatible repair can be made
  • Previous patching has not hidden widespread failure

— A complete replacement

Replacement may be better when

  • Leaks or splits affect several parts of the roof
  • The covering has reached the end of useful service
  • The deck is damaged, soft or unsuitable
  • Ponding water shows the falls need correction
  • Repeated repairs no longer offer sensible value

— A clear installation plan

Your flat roof in
four careful stages.

Project details vary, but the quotation explains the agreed system, preparation and finishing work for your property.

01

Roof survey

We inspect the covering, deck, falls, outlets and junctions before recommending the next step.

02

Written specification

You receive a clear quotation describing the proposed system, preparation and included details.

03

Preparation and fitting

The agreed roof layers and details are installed with protection for the surrounding property.

04

Drainage and finish check

Edges, outlets, junctions and the completed surface are checked before the site is cleared.

— Clear terms before booking

Deposits, quotations
and warranty details.

Our standard deposit for a complete flat roof replacement is 30%. Your quotation states the agreed work, material system, payment timing and remaining balance before the booking is confirmed.

The applicable workmanship cover and any separate manufacturer warranty depend on the specified roof system and are confirmed in writing. Keep the accepted quotation, payment records and completion documents together.

Read our deposits and payments guide →

— Flat roofing questions

Helpful answers for
Shrewsbury property owners.

Still unsure which option fits your roof? A free, no-obligation survey lets us assess the actual construction and explain the practical choices.

Which flat roof system is best for my property?+

There is no single best covering for every building. Roof size and shape, deck condition, drainage, insulation, use of the roof, edge details, budget and appearance all affect whether EPDM, GRP or high-performance felt is the better specification.

Can you replace a leaking flat roof?+

Yes. We first assess whether the leak is isolated or part of wider deterioration. If the covering, deck or details are failing across the roof, a complete replacement may provide better long-term value than repeated patch repairs.

Do you install flat roofs on extensions and garages?+

Yes. Topline Roofing works on extensions, garages, porches, dormers, garden rooms and outbuildings, as well as suitable commercial properties across Shrewsbury and nearby areas.

Does a flat roof need to be completely level?+

No. A flat roof needs designed falls so rainwater moves towards the correct outlet or gutter. Standing water can indicate a drainage, deck or construction issue that should be assessed during the survey.

Do you require a deposit for a flat roof replacement?+

Our standard deposit for a complete flat roof replacement is 30%. The payment timing, remaining balance, agreed scope and applicable warranty details are confirmed in writing before work starts.

Need help with your roof?

Speak to a local
roofer today.

You do not need to know any roofing terms. Tell us what you have noticed and we will explain the next step clearly.

☎ Call usSend enquiry →